Home > News > Content
The Function And Correct Choice Of Protective Gloves
- Jul 24, 2017 -

We all know that a protective glove is a device used to protect the safety of our hands. You might ask: why is it called Labor gloves? Does it have functions that other gloves do not have? Yes, it can be worthy of the name because it has special protective features that are not available in other ordinary gloves. Various protective gloves vary in their function, so they use different sites. Because of its special performance, we should make corresponding protective measures when we use it, otherwise it will not have the protective function which it should have, but it is no different from other ordinary gloves. Because the protective characteristics are very important to it, we should pay attention to the following aspects when purchasing and using:

1, we should be in accordance with the size of their hands to choose their own gloves: we can not choose too small gloves, because if you choose a smaller hand than our gloves, when wearing, we will feel that the hand is very le, but also not conducive to the circulation of blood in our hands, but we can not choose too big gloves, if the gloves are too large, then we will be able to work to feel quite inflexible, and gloves are very easy to fall from the hands.
2, we should choose their own gloves according to the different working environment. Different gloves have different protective effects, only according to their work environment will encounter special circumstances to choose to avoid unnecessary danger.
3, no matter what kind of gloves you use, you should do a fairly detailed examination of it, once the damage has been found, then you should immediately replace it. If you find that it has been damaged and you are unwilling to replace it, you should use other gauze gloves or leather gloves.
4, if you choose those made of synthetic rubber gloves, then the color should be very uniform, and the palm part should be thicker, but the other parts of the thick degree is the same. And its surface is relatively smooth. Most importantly, there can be no damage to any of these gloves, otherwise they can no longer be used.
5, if you choose the rubber gloves, then you should not let its long-term contact with the acid and other substances, but also should pay attention to is not to let the sharp objects touch it.
6, regardless of what kind of gloves you use, you should regularly check it accordingly, if found damage, then should make corresponding measures.
7, the work should be sleeve cuff into the mouth, in case of accident.
8, after the use of internal and external sewage should be scrubbed clean, after drying, sprinkle with talcum powder flat to prevent damage, do not put on the ground.
9, in the storage, should not be with the oleic acid alkali or other corrosive material contact, and outside the heat source 1M, in the dry ventilation-15 degrees items degree, relative humidity 50~80% warehouse storage.
10, every 6 months must carry out a retest of voltage resistance.
A lighter weight and a wide range of sizes provide increased flexibility;
Textured surfaces help to grip objects;
Cotton wool knitting inside, spacious cuffs to the temperature in a higher environment to work more comfortable sense;

Insulating Gloves for live working
An insulating glove worn by the operator when conducting live work on an alternating current voltage of 10,000 volts and below the electrical equipment (or the corresponding voltage grade DC electrical equipment). Its product type, size and technical requirements to conform to the "live operating insulation gloves general technical conditions" provisions.
Gloves must have good electrical insulation characteristics. It also requires good tensile strength and elongation, as well as puncture resistance, aging resistance, burning resistance and low temperature resistance.

Second, acid and alkali gloves
is to prevent acid-base damage to the hand protection products, its quality should conform to the "acid (alkali) gloves" provisions. Gloves are not allowed to have a spray, crisp, sticky and broken defects. No leakage of gloves refers to: must have air tightness, under the specific pressure, no gas leakage occurs.
This kind of gloves can be divided into rubber acid and alkali gloves, latex acid and alkali gloves, plastic acid-proof gloves, dipped acid and alkali-proof gloves, and so on.
Waterproof gloves, anti-virus gloves can be replaced with acid and alkali gloves.

III. Welder Gloves
Personal protective appliances for high temperature, molten metal, spark-burning hands for defense against welding. It is made of cattle, pig marmosets leather or two layers of leather, divided into two finger type, three finger type and two finger type. Welder gloves have strict appearance requirements. First-class product requirements leather body thickness uniformity, plump soft and elastic, leather facial villi meticulous, uniform, fastness, the color of the same depth, no greasy feeling. Class Two: Leather body lacks full elasticity, thick fur, slightly darker color.

Four, anti-vibration gloves
For the contact vibration, such as in forestry, mining, construction, transportation and other departments with hand-held vibration tools (such as chainsaw, rock drilling machine, etc.) to prevent vibration caused by vibrations of the "white finger disease" personal protective products. Anti-Vibration gloves in the structure, mainly in the palm surface to add a certain thickness of foam, latex and air interlayer to absorb vibration. The thicker the liner thickness, the more the air content, the better the vibration reduction effect. But the palm, the surface is too thick and easy to affect the operation.

Fire-Retardant Gloves
The traditional flame-retardant gloves are made of asbestos material, and are divided into two fingers and five fingers, with large, medium and three kinds of specifications. Because the asbestos fiber is irritating to human skin, it is seldom used. Generally used flame retardant canvas or other fire-retardant fabrics made of flame-retardant gloves, suitable for smelting furnace before or other types of furnace work.

VI. antistatic Gloves
The composition of the woven material containing conductive fibers. The other is made of long fiber stretch acrylic gloves, which are then affixed to the palm part of the polyurethane resin, or at the fingertips part of the urethane resin or gloves on the surface of the polyethylene coating.
The gloves containing conductive fibres quickly dissipate the static electricity accumulated on the hands. There are polyurethane or polyethylene coated gloves are mainly not easy to produce dust and static electricity. These products are mainly used for weak current, precision Instrument assembly, product inspection, electronic industry, printing inspection work.

Seven, dust-free gloves
From natural rubber processing, can in the production process to prevent the human finger tip discharge. In the production of dust-free gloves dust-free gloves in the process of preventing the body's electrostatic products caused damage. The product in the production process is not affected by the residue on the finger, grease, dust and sweat pollution and impact, effective protection of products. No dust room to use polyvinyl chloride (PVC) gloves mostly.

Copyright © Qingdao Bestsafe Labor Protection Products Co.,Ltd All Rights Reserved.