Home > Exhibition > Content
Instructions for the use of safety shoes
- Jul 24, 2017 -

Protect toe safety Shoes
1, product implementation Standards ld50-1994 "protection toe Safety Shoes [2] (Boots)". New national standard gb21148-2007 "personal protective equipment safety shoes".
2, Grade An1, An2, An3, An4, An5 shoes resistance to static pressure is 15KN, 10KN, 4.4KN, 3.0KN, 1.5KN, shoe head internal clearance ≥15mm. Grade An1, AN2, An3 safety shoes, with 23Kg impact hammer respectively from 900mm, 450mm, 225mm high free fall, shoe head internal clearance ≥15mm. Grade AN4, An5 safety shoes, 5Kg impact hammer respectively 450mm, 225mm high free fall, shoe head internal clearance ≥15mm.
3, An1 suitable for metallurgy, mining, forestry, ports, ships, loading and unloading, quarrying, heavy work and other operations; An2 applicable to the machinery, construction, petrochemical and other workplaces; An3 applicable to the electronics, food, medicine and other industries; An4~an5 applicable to the textile industry and fitter work, to toe-injury protection shoes (labor shoes), is necessary supplies labor protection.
4, safety shoes transport and storage to avoid direct sunlight, rain and damp, storage warehouse should be good ventilation, dry, beware of mildew moth, stacked away from the ground, walls 0. Above 2m, do not contact with acid, alkali, and other corrosive properties and toxic and harmful materials.

Antistatic shoes
1, product implementation standard gb4385-1995. Electrical performance is tested in Appendix A of gb4385-1995.
2, anti-static shoes are able to remove the human body electrostatic pole and can prevent 250V of the following power click the amount of protective shoes. Suitable for flammable and explosive working place.
3, anti-static shoes prohibit when the use of insulating shoes, wear, not at the same time wear insulation wool thick socks and insulation pads, and applied to anti-static ground.
4, Anti-Static shoes in the process of wearing, the general 200h should be tested shoes resistance value. If the resistance is not in the specified range 100kω-1000mω can not be used as anti-static shoes continue to use. Since the production date of more than 18 months of products should be related to electrical performance testing, meet the standard requirements can be sold and used.
5, in the storage, anti-static safety shoes should be stored in the dry and ventilated warehouse, to prevent mildew, stacking off the ground, walls 0.2m above, leaving all heating body 1m above, in the transport and storage process, is strictly prohibited with oil, acid, alkali or other corrosive goods contact.

Electric Insulating shoes
1, product implementation standard gb12011-2000. Main technical parameters: experimental voltage 6KV, leakage current ≤1.8mA time 1min does not penetrate.
2, the product for 6KV New Gee surface insulation shoes, applicable to the working environment of the following 1KV wear, work as an auxiliary safety equipment and labor protection supplies shoes use. When used, the regulations of Electrical Industry Safety Engineering Regulations (DL408 and DL409) must be strictly adhered to.
3, wear electric insulating shoes when their working environment should keep the upper dry. (Electrically insulated shoes are sometimes called electrical shoes)
4, products should be strictly prohibited with sharp, high-temperature, acid, alkali or other corrosive goods contact, where the bottom of the help of corrosion, damage, can no longer use electrical insulating shoes.
5, in the storage, should be stored in the dry and ventilated warehouse, to prevent mildew, stacked out of the ground, walls 0. Above 2m. Storage period of 24 months, more than 24 months of electrical insulation safety shoes must be preventive electrical performance testing.

Anti-thorn Shoes
1, the product implementation standard gb12017-1989, applies in the mine, the forestry, the fire fighting, the construction and so on profession, prevents the foot to puncture the injury the protective shoes. is the necessary supplies of labor protection.
2, prevent piercing special, Ⅰ grade, Ⅱ class, and its resistance to wear is ≥110n, 780N, 490N, should be based on different working conditions to choose the appropriate level of anti-thorn shoes.
3, transport and storage to avoid direct sunlight, rain and damp, storage warehouse should be good ventilation, dry, beware of mildew moth, stacked out of the ground, walls 0. Above 2m, puncture protective shoes do not contact with acid, alkali, and other corrosive properties and toxic and harmful materials.

Oil-resistant protective shoes
1, product implementation Standards gb16756-1997, applicable to factories, coal, oil fields and other industries to wear.
2, the product from the date of production storage period of 2 years, oil-resistant protective shoes should be placed in the ventilation, drying, mildew, insect-proof place to save, strictly prohibited with acid, alkali or other corrosive items contact

Copyright © Qingdao Bestsafe Labor Protection Products Co.,Ltd All Rights Reserved.