Home > Exhibition > Content
Problems needing attention in storage, use and inspection of insulating gloves
- Jul 24, 2017 -

Problems needing attention in storage, use and inspection of insulating gloves

1, insulating gloves are special rubber gloves, should have no pore and impurities, no sticky, no crisp, and according to the specified cycle (six months once) to do AC withstand voltage test, and to meet the eligibility requirements. Insulating gloves can be used as a basic safety device for 500V and below voltage equipment or auxiliary safety equipment for 1kV and above. Insulating gloves shall be numbered "only" units. It should be noted that medical gloves, acid-resistant gloves can not be used as insulating gloves.

2, insulating gloves should be stored in a dry and clean cabinet, not with alkali, acid, oil and chemicals contact, not by direct sunlight and rain.

3, the insulating gloves before each use, the appearance of its should be examined in detail. Gloves width to be able to cover the coat cuffs appropriate. It is required to be soft and colloid. There are serious scratches, cutting injuries, and a leak from the cuff to the beginning of the tightening and squeezing inspection, and shall not be used.

4, insulation gloves after each use should be timely with warm water and soap to clean dirty, sprinkle with talcum powder for safekeeping.

Copyright © Qingdao Bestsafe Labor Protection Products Co.,Ltd All Rights Reserved.